Поиск

Найти

Cummins PowerSpec 5.4

http://www.powerspec.cummins.com/site/home/download.htm

The PowerSpec program that calculates optimum gearing based on information supplied initially by the user. Any variation between this input data and the actual operation could affect the accuracy of the results, and make comparisons with actual operating experience questionable.

PowerSpec does not have the capability of making distinctions in resistance forces and factors affecting energy requirements, such as;

* Air Resistance due to frontal area or aerodynamic drag coefficient.
* Rolling Resistance due to tire construction (bias, radial, low profile radial, etc.).
* Air resistance increases due to winds and rain or snow.
* Rolling Resistance increases due to cold and rain or snow, or due to different pavement types and condition.
* Drivetrain and accessory loss increases due to cold weather.
* Increased fuel consumption due to use of blended fuels and long periods of idling in cold weather.

Cummins is in no way liable for hardware selections made by the users. Specifications should be reviewed with the vehicle manufacturer dealer or with a Cummins distributor.

PowerSpec version 4.2.4 was released in August 2011 and supports Cummins 2010 On-Highway engine products (ISX15, ISX 11.9, ISL9, ISC8.3, and ISB6.7), 2007 products (ISX, ISM, ISL, ISC, ISB) and earlier products.

The release was to address the trip issue with the latest calibration for the middle range engines and the compatibility issue with the competitive datalink adapters.


PowerSpec Version 4.1.0 (February 2009)
PowerSpec Version 4.1.0 was released in February 2009, and brings the following key changes:

New Features
- Simulator / Demo Mode Support (engines only)
- Metric Support
- Light Box Support
- RoadRelay 4 Inline 4/5 J1587 Datalink Support
Please note, all features above can be set from Configuration Options. Metric support is not available for Gearing in this release.

- Read ISBe engine data
- Edit OEM Ambient Air Temperature Sensor- Read RoadRelay Sudden Deceleration Data
- RoadRelay Spec Transfer will require a RoadRelay license (allow Roadrelay spec transfer
only) or PowerSpec license (allow engine and RoadRelay spec transfer).
- Trip snapshot data will be stored in separate folder
- Windows Vista (32 bit) Support
Enhancements

- Allow multiple selections when open spec files
- View Report: reports will be displayed in alphabet order
- ECM Runtime will be displayed on engine report header
- Resolved Driver Reward issue
- Dropped 3.5 spec support




Тип авто каталога: Диагностика
Регионы: Все регионы 
Поддерживаемые языки: Английский
 
Операционные системы: WinXP, Windows 7/8/10
Количество дисков: 1 CD
 
Дата: 06/2014 
Цена каталога: 50 USD

Вернуться обратно в авто каталог


Скриншоты:

Нажмите на маленькую картинку и она откроется в новом окне.

Cummins PowerSpec 5.4 PowerSpec's full functionality is available to support all Cummins on highway engine products (ISX, ISM, ISL, ISC, ISB). It also supports fault codes and trip information on ISBe, N14+ and M11+ CELECT Plus engines. Other functionality is not available for
 
Cummins PowerSpec 5.4 PowerSpec's full functionality is available to support all Cummins on highway engine products (ISX, ISM, ISL, ISC, ISB). It also supports fault codes and trip information on ISBe, N14+ and M11+ CELECT Plus engines. Other functionality is not available for
 
Cummins PowerSpec 5.4 PowerSpec's full functionality is available to support all Cummins on highway engine products (ISX, ISM, ISL, ISC, ISB). It also supports fault codes and trip information on ISBe, N14+ and M11+ CELECT Plus engines. Other functionality is not available for
 
Cummins PowerSpec 5.4 PowerSpec's full functionality is available to support all Cummins on highway engine products (ISX, ISM, ISL, ISC, ISB). It also supports fault codes and trip information on ISBe, N14+ and M11+ CELECT Plus engines. Other functionality is not available for
 

 

 

Вернуться обратно в авто каталог

Похожие каталоги:


1Calterm III 3.11 + Metafiles
Cummins Calterm III программа для диагностики двигателей Камминз
Диагностика
2Cummins C Series Engine
руководство по ремонту двигателя Каминс, обслуживание, диагностика двигателя Камминс C Engine
Руководство по ремонту
3Cummins ONAN 2013
электронный каталог запчастей и подробная документация по ремонту и сервисному обслуживанию продукции Onan Cummins, PDF
Каталог запчастей
и документация по ремонту
4Cummins VEPS VCP 7.70
VEHICLE ELECTRONICS PROGRAMMING STATION
Диагностика
5Cummins Intercept Middle Power Range Repair
руководства по ремонту двигателей Камминс, обслуживание, диагностика двигателей Каминс и техники Cummins (Камминс)
Руководство по ремонту
6Cummins Intercept Heavy Duty Repair
руководства по ремонту, обслуживанию, диагностике тяжелых двигателей Каминс G14, ISM, QSM11, ISMe, L Gas Plus, L10, L10 Gas, M11, NH, NT, N14, Камминс ISX, QSX15, устанавливаемых на легких и тяжелых грузовиках, сельскохозяйственной технике, генераторах, морских катерах, яхтах, и.т.д.
Руководство по ремонту
7Cummins INCAL 2016
прошивки и файлы с калибровочными данными для двигателей Cummins - Automotive Calibrations Data for Cummins Insite
Диагностика
8CUMMINS Middle Range CEPS
каталог запчастей по средним двигателям Cummins
Каталог запчастей
9Calterm III 3.11 + MetaFiles
Calterm III is an engineering development tool used to monitor Electronic Control Modules for Cummins engine systems and to alter the calibration data contained therein. Calterm III is designed to modify fueling calibration parameters and feature settings
Диагностика
10Cummins Engine N-14
Руководство по поиску неисправностей и ремонту двигателей серии N14 (моделей STC, CELECTTM, CELECTTM Plus)
Руководство по ремонту
+7-917-1238-777
epc@autoepc.net